Seaton Sound Discussion Forum
Register Calendar Latest Topics
 
 
 


Reply
  Author   Comment   Page 4 of 17      Prev   1   2   3   4   5   6   7   Next   »
jparkhur

Avatar / Picture

Registered:
Posts: 7
Reply with quote  #61 
FS:  Two MFW 15 in flat black, new drivers, v3 amps, purchased in june of 2010.  400 per, shipping from 54601. deal for two ....
Liaury

Registered:
Posts: 20
Reply with quote  #62 
Like to unload in the Houston area.  For $350, you can get a Rosewood MFW-15 with a working original woofer but a dead V2 amp.  I can throw in a working V2 amp for free (you know how much these amps are worth), but I'd rather keep it to hold me over till I can upgrade my second sub.  There is no noticeable aesthetic issues (but I did not go over it with a fine tooth comb).  If you are interested, please send me a message.

Update: Reduced to $325.
fosheezy

Registered:
Posts: 6
Reply with quote  #63 
Ive got two satin black MFWs-one with a V3 amp and one with a V2. no hum-$400 each
Ive also got a spare working V2 amp that I will throw in if you buy both subs.
California Central Valley-95348-pickup only
PM me if interested
nottaway

Registered:
Posts: 85
Reply with quote  #64 
Quote:
Originally Posted by Mark_Seaton
Quote:
Originally Posted by paw

Quote:

I have the faceplate screws and rubber washers........all of them!  

$225.00 plus shipping  just kidding

Just let me know and i will mail them
 to whom ever needs them. 


Murrel
 


Hows the amp business going?



FYI, these are readily available parts from McMaster-Carr if they are needed by anyone.  I'll later post up what is needed, but basically it's a 1/4-20 flat head machine screw ~2" long (black oxide) and a rubber washer that can clear the 1/4" diameter screw.


Good ole McMaster Carr easy to find what you need even if a little on the the expensive side...

Any Developments on the proto driver?  You guys had a chance to put it through the paces yet?

__________________
AKA NicksHitachi
bonebad1

Registered:
Posts: 14
Reply with quote  #65 
Hey I have a MOHO Diamond finish for sale.  The cabinet is in great condition, the subs dustcap has a dent in it, I can take a pic of it if you want.  I am not sure what version amp it is but I bought it in October of 2009.  Works perfectly and I have never had problems with it.  I would like to get $400 for it.  I can deliver it within reasonable distance from Lake Crystal, MN, or we can meet
nottaway

Registered:
Posts: 85
Reply with quote  #66 
People needing driver.

http://www.audiocircle.com/index.php?topic=84989.new#new

__________________
AKA NicksHitachi
techracer

Registered:
Posts: 10
Reply with quote  #67 
Anyone with a spare V3 amp?  I've got one now that's developed a nasty hum....
boober

Registered:
Posts: 67
Reply with quote  #68 
Quote:
Originally Posted by techracer
Anyone with a spare V3 amp?  I've got one now that's developed a nasty hum....


What version is yours that's developed the hum? Thanks.
techracer

Registered:
Posts: 10
Reply with quote  #69 
It's supposedly a v3.  I got it last Dec as b-stock.  How can you tell which version it is?
Stereodude

Registered:
Posts: 393
Reply with quote  #70 
I believe that the V3 amps don't use the upper controls.
boober

Registered:
Posts: 67
Reply with quote  #71 
Quote:
Originally Posted by techracer
It's supposedly a v3.  I got it last Dec as b-stock.  How can you tell which version it is?


Sounds like you have the v2. V3's came out in May of this year. Stereodude is correct about the upper control module not being used.
techracer

Registered:
Posts: 10
Reply with quote  #72 
Anyone have a V3 amp they want to part with?
stevesatch

Registered:
Posts: 36
Reply with quote  #73 

I need two version 3 amps.  Please keep me in mind when you turbo upgrade.

nottaway

Registered:
Posts: 85
Reply with quote  #74 
I'm looking to pickup a couple controller boards from old V2 amps.  Those with V3s might have some they aren't using, or of the handful of people with turbo kits.......

Also "somebody" picked up a bunch of them from the auction anyone know where to get a couple of them?

__________________
AKA NicksHitachi
sandbagger

Avatar / Picture

Moderator
Registered:
Posts: 524
Reply with quote  #75 
Drop me an email..... I know where you can get a few....


Quote:
Originally Posted by nottaway
I'm looking to pickup a couple controller boards from old V2 amps.  Those with V3s might have some they aren't using, or of the handful of people with turbo kits.......

Also "somebody" picked up a bunch of them from the auction anyone know where to get a couple of them?

__________________
Kevin
Motor City Custom Audio
http://motorcitycustomaudio.com/
nottaway

Registered:
Posts: 85
Reply with quote  #76 
Still looking to buy an mfw amp controller module and wiring or two off anyone who doesn't need them......

__________________
AKA NicksHitachi
boober

Registered:
Posts: 67
Reply with quote  #77 
Quote:
Originally Posted by nottaway
Still looking to buy an mfw amp controller module and wiring or two off anyone who doesn't need them......


Pure Evil at avs posted a message maybe about 2 weeks ago or so offering to give away the 1 or 2 that he had for free I believe. Send him a pm, hopefully for you maybe he still has them.
nottaway

Registered:
Posts: 85
Reply with quote  #78 
Got my controllers......

Thanks for your help.....

__________________
AKA NicksHitachi
bmrowe

Registered:
Posts: 2
Reply with quote  #79 
I've got a working MFW-15 w/ V2 amp in perfect shape and low usage for $400 plus shipping or local pickup in the Milwaukee area.

I've also got an MFW-15 w/ a failed V2 amp.  The sub is in perfect shape, just needs a new amp.  Make an offer.
tjcarst

Registered:
Posts: 5
Reply with quote  #80 

WTB two v3 amps.

Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.